落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-14 18:47
浏览次数:2193
摘要:
ASTMD495耐高压低电流电弧放电试验机

高交流电压小电流量应力测试仪(耐弧光应力测试仪)-(统计机抑制)

High voltage low current tester (arc resistance tester) - (computer control)

好产产品明称称:耐电弧试验机

Product name: electric arc resistance tester

产品设备机型:NDH-A

Product model: NDH - A

拥有标准规定:GB/T 1411-2002《液体绝缘带食材耐高降低电压电孤电流的做实验的时候》(就是指IEC  61621-1997)及ASTM D495等原则的适合要求设计制作营造的,并适合IEC 149、UL 746A等实验措施

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

最主要的使用範圍及的功能:

本耐压机是安装广泛应使用于调速电机、物品和家装物品等服务业的电焊工用泡沫塑料材质、聚酯硅橡胶胶和隔热漆等隔热板材的耐弧光稳定性评比,主使用于气体隔热板材如:泡沫塑料材质、聚酰亚胺膜、聚酯硅橡胶、白云母、瓷器、玻璃窗、隔热油、隔热漆、厚纸板等媒质的耐弧光稳定性各种测试;

本现场研究机由核算机管理电脑运行,可表现现行研究状况及研究事件,研究完结后并手机截图现行研究动态数据,并可打印文件.标准的实验室计划书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为上下两边一体式结构的,上方为进行操作系統,上方为实验箱。

2 本新产品选用*新智力管控技术水平,完成确定系统程序(IEC或ASTM)可自动化开展耐压试验,并在网上上表现试验台的过程 和后果。

3 **效果优良,抗电磁干扰效果强,公测导致精度大。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电孤通断时刻数据误差:超过 ±10ms

2 调压器体积:2kVA

3 特殊实验设计电压电流:12.5kV

4 试验检测交流电压精密度:±3%

5 瞬时电流保持精度等级:±10%  感应电流在测量控制精度:1.5%

6 参比电极对钢材拉伸试验水压:(0.5±0.05)N

7 电极片物料:钨棒

8 金属电极长度:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 的使用环保温湿度:(23±2)℃

10 实用坏境温度:(50±5)%

11 电压:220V±5%  50Hz  10A

12 测试    方案:   国家标准/美标/10 mA 连续式/20 mA 连续不断/30 mA连续不断/40 mA累计

13 冲击试验程序流程如下图所示:

应用程序段

电孤感应电流

mA

电孤通断周期s

各方式段定期的时间s

试验装置总日期s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

累计通

60

240

5

20

间隔通

60

300

6

30

连续性通

60

360

7

40

维持通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

顺序号

英文名称

数

自己的名字

01

耐弧光測試仪

一辆

 

02

金属电极系统

套

 

03

电极材料支架

一款

 

04

电源开关电力电缆

做一套

 

05

地线放**

一个

 

06

电流值毫安表

整台

 

07

台式机测控软文

设计一套

 

08

试件材料架

每支

 

09

金属电极长度规范标准块

2块

 

10

角度看的标准块

2块

 

11

瓷质片

2片

 

12

喷墨word彩喷机

1台

牌子

13

核算机

1台

品牌标志

14

选用情况操作说明

1份

 

15

优秀证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 商品款型:

NDH-A    耐焊弧校正仪-微机控制

NDH-B    耐电弧焊接实验室检测仪-触感屏抑制

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪